FixVault
Home › Subaru › 2006 › Baja Base, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Impact Sensor › Removal

Impact Sensor: Removal

NOTE: The impact sensor is an optional part installed by the dealer.
  1. Remove the key from the ignition switch.
  2. Close all the doors.
  3. Press the UNLOCK button of the transmitter.
  4. Change the setting of the impact sensor using the SUBARU Select Monitor.
  5. Disconnect the ground cable from the battery.
  6. Remove the impact sensor.
About FixVault