FixVault
Home › Subaru › 2006 › Baja Base, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Security System › Inspection › Check Battery Disconnect Protection

Check Battery Disconnect Protection

  1. Remove the key from the ignition switch.
  2. Close all the doors.
  3. Open the front hood.
  4. Press the LOCK/ARM button of transmitter, and then wait until the security indicator light repeats 2 blinks per 1 second at interval of 1 second.
  5. Disconnect the ground cable from the battery.
  6. Reconnect the cable to the battery.
  7. Make sure that the security indicator light repeats 2 blinks per 1 second at interval of 1 second. If NG, replace the keyless entry control module.
About FixVault