SUBARU Select Monitor (OBD Mode)

On the «Main Menu» display screen, select the {2. Each System Check} and press the [YES] key.
On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES] key.
Press the [YES] key after displayed the information of engine type.
On the «Engine Diagnosis» display screen, select the {OBD System} and press the [YES] key.
On the «OBD Menu» display screen, select the {Diagnosis Code(s) Display} and press the [YES] key.
Make sure that a diagnostic trouble code (DTC) is shown on the display screen.

NOTE:

For detailed operation procedure, refer to the Subaru Select Monitor Operation Manual.
For detailed concerning diagnostic trouble codes, refer to the LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .
< Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >