Section 12 (Starting/Charging Systems (H4SO)): Generator: Inspection: Stator

WARNING: This page is about a different variant/trim than selected.

Continuity test
Inspect the stator coil for continuity between each end of the lead wires. If resistance is 1 M Ω or more, the lead wire is broken, and so replace the stator assembly.

Fig 1: Checking Stator Coil For Continuity Between Each End Of Lead Wires
Courtesy of SUBARU OF AMERICA, INC.
Insulation test
Inspect the stator coil for continuity between stator core and each end of lead wire. If resistance is 1 Ω or less, the stator coil is grounded, and so replace the stator assembly.

Fig 2: Checking Continuity Between Stator Core And Each End Of Lead Wire
Courtesy of SUBARU OF AMERICA, INC.