FixVault
Home › Subaru › 2006 › Forester X, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Reduction Drive Gear › Removal

Reduction Drive Gear: Removal

  1. Remove the transmission assembly from vehicle body. <Ref. to REMOVAL  AUTOMATIC TRANSMISSION ASSEMBLY. >
  2. Remove the rear wheel speed sensor, and separate the extension case from transmission case. <Ref. to REMOVAL  EXTENSION CASE. >
  3. Remove the reduction driven gear. <Ref. to REMOVAL  REDUCTION DRIVEN GEAR. >
  4. Using the ST, extract the reduction drive gear assembly.

    ST1 499737100 PULLER SET

    ST2 899524100 PULLER SET

    Fig 1: Removing Reduction Driven Gear Using Special Tool
    G04994197Courtesy of SUBARU OF AMERICA, INC.
About FixVault