FixVault
Home › Subaru › 2006 › Forester X, Standard › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake Control System - Vehicle Dynamics Control (VDC) › VDC Hydraulic Control Module (VDCH/M) › Removal › Relay Box

Relay Box

  1. Disconnect the ground cable from battery.
  2. Remove the air intake duct from engine room to make it easier to remove the relay box.
  3. Disconnect the connector from relay box.
  4. Remove the cable clip.
  5. Remove the bolts which secure the relay box, and remove the relay box and connector bracket.
Fig 1: Locating Relay Box Connector Bracket Bolts
G04994860
CAUTION: Do not drop or bump the relay box.
About FixVault