Starting/Charging (H4SO): General Description: Specification
GENERAL SPECIFICATION
| Item | Specification | |||
|---|---|---|---|---|
| Vehicle model | MT | AT | ||
| Starter | Type | Reduction type | ||
| Model | M000T30471 | M000T20171 | ||
| Manufacturer | Mitsubishi Electric | |||
| Voltage and output | 12 V - 1.0 kW | 12 V - 1.4 kW | ||
| Revolving direction | Counterclockwise (when observed from pinion) | |||
| Number of pinion teeth | 8 | 9 | ||
| No-load characteristics | Voltage | 11 V | ||
| Current | 95 A or less | 90 A or less | ||
| Rotating speed | More than 2,500 rpm | More than 2,000 rpm | ||
| Load characteristics | Voltage | 7.5 V | 7.7 V | |
| Current | 300 A | 400 A | ||
| Torque | 8.84 N.m (0.90 kgf-m, 6.5 ft-lb) or more | 16.7 N.m (1.70 kgf-m, 12.3 ft-lb) or more | ||
| Rotating speed | More than 870 rpm | More than 710 rpm | ||
| Lock characteristics | Voltage | 4 V | 3.5 V | |
| Current | 680 A or less | 960 A or less | ||
| Torque | 17 N.m (1.73 kgf-m, 12.5 ft-lb) or more | 31.0 N.m (3.16 kgf-m, 22.9 ft-lb) or more | ||
| Generator | Type | Rotating-field three-phase type, voltage regulator built-in type, with load response control system | ||
| Model | Non-turbo | A2TG0391 | ||
| Turbo | A3TG0491 | |||
| Manufacturer | Mitsubishi Electric | |||
| Voltage and output | Non-turbo | 12 V - 90 A | ||
| Turbo | 12 V - 110 A | |||
| Polarity on ground side | Negative | |||
| Revolving direction | Clockwise (when observed from pulley side) | |||
| Armature connection | 3-phase Y-type | |||
| Output current | Non-turbo | More than 1,500 rpm - 40 A More than 2,500 rpm - 74 A More than 5,000 rpm - 84 A |
||
| Turbo | More than 1,500 rpm - 50 A More than 2,500 rpm - 91 A More than 5,000 rpm - 105 A |
|||
| Regurated voltage | 14.1 - 14.8 V [20 °C (68 °F)] | |||
| Battery | Voltage and capacity | 12V-48AH (55D23L) | 12V-52AH (75D23L) | |