FixVault
Home › Subaru › 2006 › Forester XT Limited, Standard › Repair and Diagnosis (Single Page) › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H4DOTC) › Tumble Generator Valve Assembly › Removal › Notes

Tumble Generator Valve Assembly: Removal: Notes

  1. Release the fuel pressure. <Ref. to RELEASING OF FUEL PRESSURE  PROCEDURE, FUEL.>
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Battery Ground Cable
    G04988132
  3. Open the fuel filler flap lid, and remove the fuel filler cap.
  4. Remove the collector cover.
  5. Remove the intake manifold.

    <Ref. to REMOVAL  INTAKE MANIFOLD.>

  6. Disconnect the connector from tumble generator valve sensor.
    Fig 2: Locating Tumble Generator Valve Sensor
    G04998384
  7. Disconnect the connector from tumble generator valve actuator.
    Fig 3: Locating Tumble Generator Valve Actuator Connector
    G04998305
  8. Remove the fuel injector.

    <Ref. to REMOVAL  FUEL INJECTOR.>

  9. Remove the tumble generator valve body from intake manifold.
Fig 4: Locating Tumble Generator Valve Assembly Bolts
G04998320
About FixVault