Drive Cycle F
- Check that the engine coolant temperature at engine start is 30°C (86°F) or less.
- Warm up the engine until the engine coolant temperature exceeds 95°C (203°F) from engine start.
- After the engine has reached the state of procedure 2), idle the engine for more than 10 minutes.
NOTE:
Do not disconnect the battery terminals while diagnosing. (Data will be cleared when disconnecting the battery terminals.)
DIAGNOSTIC TROUBLE CODE
| DTC | Item | Condition |
|---|---|---|
| P0111 | Intake Air Temperature Sensor 1 Circuit Range/Performance | - |