FixVault
Home › Subaru › 2006 › Forester XT Limited, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 16 (Speed Control Systems (H4SO)) › Accelerator Pedal › Removal

Accelerator Pedal: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the ground cable from battery.
  2. Disconnect the connector (A).
  3. Remove the nut (B) securing accelerator pedal assembly.
Fig 1: Identifying Accelerator Pedal Assembly Connector And Nut
G04992905
About FixVault