General Diagnostic Table: Inspection
GENERAL DIAGNOSTIC TABLE
| Symptom | Remedy |
|---|---|
| Starter does not run. | Adjust select cable and inhibitor switch, or inspect circuit. |
| Back-up light does not light up. | Adjust select cable and inhibitor switch, or inspect circuit. |
| AT shift lock system does not operate normally. | Adjust select cable and inhibitor switch, or inspect circuit. |
| Shift into reverse is impossible. (6MT) | Adjust reverse check cable. |
| Shift into reverse is possible without pulling up slider. (6MT) | Adjust or replace reverse check cable. |
| Slider cannot be pulled up. Or slider is pulled up being sticked. (6MT) |
|