FixVault
Home › Subaru › 2006 › Impreza Outback Sport, Standard › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H4SO) › Camshaft Position Sensor › Removal

Camshaft Position Sensor: Removal

  1. Disconnect the ground cable from battery.
  2. Disconnect the connector from camshaft position sensor.
    Fig 1: Identifying Camshaft Position Sensor Connector
    G04997339
  3. Remove the bolt which installs camshaft position sensor to the support.
    Fig 2: Locating Camshaft Position Sensor
    G04997389
  4. Remove the bolt which installs the camshaft position sensor support to camshaft cap LH.
    Fig 3: Locating Camshaft Position Sensor Support Bolts
    G04997390
  5. Remove the camshaft position sensor and the support as a unit.
  6. Remove the camshaft position sensor itself.
    Fig 4: Locating Camshaft Position Sensor
    G04997391
About FixVault