RH Side

Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
Disconnect the ground cable from battery.
Open the fuel filler flap lid, and remove the fuel filler cap.
Remove the air intake chamber and air cleaner case. < Ref. to REMOVAL , Air Intake Duct. > < Ref. to REMOVAL , Air Cleaner Case. >
Remove the power steering pump and tank.
1. Remove the front side V-belt. < Ref. to REMOVAL , V-belt. >
2. Remove the bolts which hold the power steering pipes onto the intake manifold protector RH.
  NOTE: Do not disconnect the power steering hose.
  
  Fig 1: Locating Power Steering Pump And Reservoir Tank Bracket
3. Remove the bolts which install the power steering pump to the bracket.
  
  Fig 2: Locating Power Steering Pump Bracket Bolts
4. Disconnect the power steering pump switch connector (A).
  
  Fig 3: Locating Power Steering Pump Switch Connector
5. Remove the reservoir tank from the bracket by pulling it upwards.
  
  Fig 4: Locating Reservoir Tank
6. Place the power steering pump and tank on the right side wheel apron.
  
  Fig 5: Identifying Power Steering Pump On Right Side Wheel Apron
Remove the spark plug cords from spark plugs (#1 and #3 cylinders).
Remove the fuel pipe protector RH.

Fig 6: Locating Fuel Pipe Protector RH
Disconnect the connector (A) from fuel injector.
Remove the harness band (B) which holds engine harness to fuel injector pipe.

Fig 7: Locating Harness Band
Remove the bolts which hold fuel injector pipe onto intake manifold.

Fig 8: Locating Fuel Injector Pipe Bolts - RH Side
Remove the fuel injector while lifting up the fuel injector pipe.