RH Side

Install in the reverse order of removal.

NOTE: Replace the O-ring and insulators with new ones.

Fig 1: Identifying Insulator And Fuel Injector

Tightening torque:

19 N.m (1.94 kgf-m, 13.7 ft-lb)

Fig 2: Locating Bolt Holding Fuel Injector Pipe Onto Intake Manifold (RH)

Tightening torque:

19 N.m (1.94 kgf-m, 13.7 ft-lb)

Fig 3: Locating Bolt Holding Fuel Injector Pipe Onto Intake Manifold (RH)

Tightening torque:

19 N.m (1.94 kgf-m, 13.7 ft-lb)

Fig 4: Locating Fuel Pipe Protector With Bolts (RH)