Rear Oxygen Sensor: Installation

Before installing rear oxygen sensor, apply anti-seize compound only to the threaded portion of rear oxygen sensor to make the next removal easier.
CAUTION: Never apply anti-seize compound to protector of rear oxygen sensor.

Anti-seize compound: NEVER-SEEZ NS-165 or equivalent
Install the rear oxygen sensor.
Tightening torque:

21 N.m (2.1 kgf-m, 15.2 ft-lb)

Fig 1: Locating Rear Oxygen Sensor
- AT model
  
  Fig 2: Locating Rear Oxygen Sensor (AT Model)
- MT model
  
  Fig 3: Locating Rear Oxygen Sensor (AT Model)
Connect the connector to the rear oxygen sensor.

Fig 4: Locating Rear Oxygen Sensor Connector
Connect the clip to the crossmember.

Fig 5: Locating Clip
Lower the vehicle.
Connect the battery ground cable to battery.