FixVault
Home › Subaru › 2006 › Impreza WRX TR › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H4DOTC) › Tumble Generator Valve Assembly › Removal

Tumble Generator Valve Assembly: Removal

  1. Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
  2. Disconnect the ground cable from battery.
  3. Open the fuel filler flap lid and remove the fuel filler cap.
  4. Remove the intake manifold. < Ref. to REMOVAL , Intake Manifold. >
  5. Disconnect the connector from the tumble generator valve sensor.
    Fig 1: Locating Tumble Generator Valve Sensor Connector
    G04998384
  6. Disconnect the connector from the tumble generator valve actuator.
    Fig 2: Locating Tumble Generator Valve Actuator Connector
    G04998385
  7. Remove the fuel injector. < Ref. to REMOVAL , Fuel Injector. >
  8. Remove the tumble generator valve body from the intake manifold.
    Fig 3: Locating Tumble Generator Valve Assembly Bolts
    G04998320
About FixVault