FixVault
Home › Subaru › 2006 › Outback R › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H6DO) › Manifold Absolute Pressure Sensor › Removal

Manifold Absolute Pressure Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586
  3. Disconnect the connector from manifold absolute pressure sensor (A), and remove the filter assembly (B) from intake manifold.
    Fig 2: Identifying Manifold Absolute Pressure Sensor And Filter Assembly
    G05018450
  4. Remove the manifold absolute pressure sensor from intake manifold.
About FixVault