FixVault
Home › Subaru › 2006 › Outback R › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H6DO) › Mass Air Flow and Intake Air Temperature Sensor › Removal

Mass Air Flow and Intake Air Temperature Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586
  2. Disconnect the connector from the mass air flow and intake air temperature sensor.
    Fig 2: Locating Connector
    G05018452
  3. Remove the mass air flow and intake air temperature sensor.
    Fig 3: Locating Mass Air Flow And Intake Air Temperature Sensor Bolts
    G05018453
About FixVault