Back Panel Tray: Installation

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Replace all clips on the reverse of back panel tray with new ones.

Fig 1: Identifying Back Panel Tray Clips
Courtesy of SUBARU OF AMERICA, INC.
Install in the reverse order of removal.
Tightening torque:

Cargo bed side molding;

7.5 N.m (0.76 kgf-m, 5.53 ft-lb)

Cargo bed side tray;

7.5 N.m (0.76 kgf-m, 5.53 ft-lb)