FixVault
Home › Subaru › 2006 › Outback R › Repair and Diagnosis › External Pages › Different car › Section 12 (Exterior/Interior Trim) › Back Panel Tray › Removal

Back Panel Tray: Removal

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cargo bed side tray. < Ref. to REMOVAL , CARGO BED SIDE TRAY. >
  2. Remove cargo bed side molding. < Ref. to REMOVAL , CARGO BED SIDE MOLDING. >
  3. Remove cargo bed C pillar molding. < Ref. to REMOVAL , CARGO BED C PILLAR MOLDING. >
  4. Remove screw and back panel tray.
    Fig 1: Identifying Screw And Back Panel Tray
    G04991788Courtesy of SUBARU OF AMERICA, INC.
    NOTE: Do not reuse the removed clips; use new ones.
About FixVault