FixVault
Home › Subaru › 2006 › Outback R › Repair and Diagnosis › External Pages › Different car › Section 25 (Security And Locks) › Impact Sensor › Installation

Impact Sensor: Installation

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the key from the ignition switch.
  2. Close all the doors.
  3. Press the UNLOCK button of transmitter.
  4. Disconnect the ground cable from the battery.
  5. Install the impact sensor.
  6. Connect the ground cable to the battery.
  7. Change the setting of the impact sensor using the SUBARU Select Monitor.
About FixVault