FixVault
Home › Subaru › 2006 › Outback R › Repair and Diagnosis › External Pages › Different car › Section 25 (Security And Locks) › Keyless Entry Control Module › Removal

Keyless Entry Control Module: Removal

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect ground cable from battery.
  2. Remove glove box. < Ref. to REMOVAL , GLOVE BOX. >
  3. Remove nut, then remove keyless entry control module (A) and the other electrical control module (B) while disconnecting connector.
    Fig 1: Identifying Keyless Entry Control Module And Electrical Control Module
    G04991662Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect keyless entry control module and the other control module.
About FixVault