FixVault

Check Battery Disconnect Protection

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the key from the ignition switch.
  2. Close all the doors.
  3. Open the front hood.
  4. Press the LOCK/ARM button of transmitter, and then wait until the security indicator light repeats 2 blinks per 1 second at interval of 1 second.
  5. Disconnect the ground cable from the battery.
  6. Reconnect the cable to the battery.
  7. Make sure that the security indicator light repeats 2 blinks per 1 second at interval of 1 second. If NG, replace the keyless entry control module.