FixVault
Home › Subaru › 2006 › Outback R › Repair and Diagnosis › External Pages › Different car › Section 25 (Security And Locks) › Security System › Inspection › On/Off Setting Of Security System

On/Off Setting Of Security System

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When the operations of steps  1) to  4) are performed while the setting of the security system is ON, the setting of the security system turns to OFF.
  1. Close all the doors, and then sit in the driver's seat. Press the UNLOCK button of transmitter.
  2. Turn the ignition switch ON.
  3. Press the door lock switch toward the UNLOCK side and open the driver's door. Maintain this condition for 10 seconds.
  4. Switch the setting of the security system (ON o OFF), and then sound the horn.
    SWITCH OPERATION

    Setting Horn
    OFF → ON Once
    ON → OFF Twice
    NOTE: Refer to the following for the ON/OFF setting of the security system using the select monitor.< Ref. to PROCEDURE , SECURITY CONTROL MODULE. >
About FixVault