Section 11 (Clutch System): Flywheel: Removal

WARNING: This page is about a different variant/trim than selected.

NOTE: The illustration below is for a Turbo model. However, perform the same procedures for the Non-turbo model.

Remove the transmission assembly. < Ref. to REMOVAL , Manual Transmission Assembly. >
Remove the clutch cover and clutch disc. < Ref. to REMOVAL , Clutch Disc and Cover. >
Using ST1 and ST2, remove the flywheel.
ST1 498497100 CRANKSHAFT STOPPER

ST2 499057000 TORX® PLUS

Fig 1: Removing Flywheel Bolts Using ST1 (498497100)