FixVault
Home › Subaru › 2006 › Outback XT, Automatic › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Security And Locks › Keyless Entry Control Module › Removal

Keyless Entry Control Module: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the glove box. < Ref. to REMOVAL , Glove Box. >
  3. Remove the screw, disconnect the connector and remove the keyless entry control module.
    Fig 1: Locating Keyless Entry Control Module Screws
    G05022830
About FixVault