FixVault
Home › Subaru › 2006 › Outback XT, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - Engine (Diagnostics) (H4DOTC) › Drive Cycle › Procedure › Preparation For Drive Cycle

Preparation For Drive Cycle

  1. Check battery voltage is more than 12 V and fuel remains half [20 - 40 l  (5.3 - 10.6 US gal, 4.4 - 8.8 lmp gal)].
  2. After performing the diagnostics and clearing the memory, check for any remaining unresolved trouble data. < Ref. to CLEAR MEMORY MODE . >
  3. Disconnect the test mode connectors.
NOTE:
  • Perform the diagnosis after warming up the engine except when the engine coolant temperature at starting is specified.
  • Perform the diagnosis twice if the DTC marked with *. After completing the first diagnosis, stop the engine and perform second diagnosis in same condition.
About FixVault