Activation Of Malfunction Indicator Light

When the ignition switch is turned to ON (engine OFF), the malfunction indicator light (A) in the combination meter illuminates.
NOTE: If the malfunction indicator light does not illuminate, perform diagnostics of the malfunction indicator light circuit or the combination meter circuit. < Ref. to MALFUNCTION INDICATOR LIGHT DOES NOT COME ON , Malfunction Indicator Light. >

Fig 1: Identifying Malfunction Indicator Light
After starting the engine, the malfunction indicator light goes out. If it does not go off, either the engine or emission control system has malfunction.

Fig 2: Malfunction Indicator Light Blinking Graph
Turn the ignition switch to OFF and connect the test mode connector.
1. When the ignition switch is turned to ON (engine OFF), the malfunction indicator light illuminates.
2. After the engine starts, malfunction indicator light blinks in a cycle of 0.5 Hz. (During diagnosis)
3. Malfunction indicator light blinks at a cycle of 3 Hz after diagnosis if there is no trouble. Malfunction indicator light illuminates if faulty.
  
  Fig 3: Malfunction Indicator Light Blinking Graph