VTD Model
WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
- Set the select lever to "P" range.
- Using a plastic hammer, install reduction driven gear assembly.
- Using a plastic hammer, install the center differential assembly.
- Install a new self-lock nut and a washer.
Tightening torque: 100 N.m (10.2 kgf-m, 73.8 ft-lb)
- After tightening, stake the lock nut securely.
- Insert the rear drive shaft assembly. < Ref. to INSTALLATION . >
- Combine the transmission case with the extension case, and install rear vehicle speed sensor. < Ref. to INSTALLATION . >
- Install the transmission assembly to vehicle. < Ref. to INSTALLATION . >