FixVault
Home › Subaru › 2006 › Outback XT, Standard › Repair and Diagnosis › External Pages › Different car › Section 21 (Security And Locks) › Integrated Module › Removal

Integrated Module: Removal

WARNING: This page is about a different car, the 2006 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the instrument panel lower cover. < Ref. to REMOVAL , INSTRUMENT PANEL ASSEMBLY. >
  3. Remove the nut, then remove the integrated module while disconnecting the connector.
    Fig 1: Locating Integrated Module
    G04991663Courtesy of SUBARU OF AMERICA, INC.
About FixVault