FixVault
Home › Subaru › 2006 › Outback XT, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 10 (Automatic Transmission 4AT) › Reduction Driven Gear › Assembly

Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Install the snap ring to reduction driven gear.
  2. Install the new ball bearing to reduction driven gear using press.
    Fig 1: Identifying Snap Ring
    G05021916Courtesy of SUBARU OF AMERICA, INC.
  3. Install the snap ring to reduction driven gear.
    Fig 2: Identifying Snap Ring
    G05021917Courtesy of SUBARU OF AMERICA, INC.
About FixVault