FixVault
Home › Subaru › 2006 › Outback i, Automatic › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H4SO) › 10.Mass Air Flow and Intake Air Temperature Sensor › A: Removal

A: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Identifying Ground Cable From Battery
    G05019586
  2. Disconnect the connectors from the mass air flow and intake air temperature sensor.
  3. Remove the mass air flow and intake air temperature sensor.
    Fig 2: Locating Intake Air Temperature Sensor
    G05016812
About FixVault