FixVault
Home › Subaru › 2006 › Outback i, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - Engine (Diagnostics) (H4SO) › Subaru Select Monitor › Operation › V.I.N. Registration

V.I.N. Registration

  1. On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
  2. On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after the information of engine type has been displayed.
  4. On the «Engine Diagnosis» display screen, select the {VIN Registration} and press the [YES] key.
  5. Perform the procedure displayed on screen.
    NOTE: For detailed operation procedure, refer to the "Subaru Select Monitor Operation Manual".
About FixVault