FixVault

Special Tool

SPECIAL TOOL REFERENCE CHART

ILLUSTRATION TOOL NUMBER DESCRIPTION REMARKS
G05002425
498575400 OIL PRESSURE GAUGE ASSY Used for measuring oil pressure.
G05002426
498897200 ADAPTER Used at the oil pump housing when measuring reverse clutch pressure and line pressure.
G05002427
498897700 ADAPTER SET Used for measuring transfer clutch pressure.
G05002428
498545400 FILTER WRENCH Used for removing and installing the ATF filter.
G04997553
498277200 STOPPER SET Used for removing and installing automatic transmission assembly to engine.
G05002431
398527700 PULLER ASSY
  • Used for removing the extension case roller bearing.
  • Used for removing the extension oil seal.
  • Used for removing the front differential side retainer bearing outer race.
  • Used for removing the front differential side retainer oil seal.
G05002432
498057300 INSTALLER Used for installing the extension oil seal.
G05002430
41099AC000 ENGINE SUPPORT ASSY Used for supporting the engine.
G05002433
498077000 REMOVER Used for removing the differential taper roller bearing.
G05002434
499247400 INSTALLER
  • Used for installing the transfer outer snap ring.
  • Used with GUIDE (499257300).
G05002435
499257300 SNAP RING OUTER GUIDE
  • Used for installing the transfer outer snap ring.
  • Used with INSTALLER (499247400).
G05002925
18630AA010 WRENCH ASSY
  • Used for removing and installing the differential side retainer.
  • WRENCH ASSY (499787000) can also be used.
G05002437
398437700 DRIFT Used for installing the converter case oil seal.
G04990233
398487700 INSTALLER Used for installing the front differential taper roller bearing.
G05002438
398673600 COMPRESSOR Used for removing and installing the clutch spring.
G05002439
498255400 PLATE Used for measuring the backlash of hypoid gear.
G05002440
399893600 PLIERS Used for removing and installing the clutch spring.
G05002441
498247001 MAGNET BASE
  • Used for measuring the gear backlash.
  • Used with DIAL GAUGE (498247100).
G05002442
498247100 DIAL GAUGE
  • Used for measuring the gear backlash.
  • Used with MAGNET BASE (498247001).
G05002443
498517000 REPLACER Used for removing the front roller bearing.
G05002444
398623600 SEAT Used for removing the spring of the transfer clutch piston.
G05002445
499267300 STOPPER PIN Used for installing the inhibitor switch.
G05002446
499787700 WRENCH Used for removing and installing the drive pinion lock nut.
G05002447
499787500 ADAPTER Used for removing and installing the drive pinion lock nut.
G05002448
398643600 GAUGE Used for measuring the total end play, extension end play and drive pinion height.
G05002449
498627100 SEAT Used for holding the low clutch piston retainer spring when installing snap ring.
G05002450
499577000 GAUGE Used for measuring the mating surface of the transmission to the end face of the reduction gear.
G05002452
499737000 PULLER Used for removing the reduction driven gear assembly.
G05002453
499737100 PULLER SET Used for removing the reduction drive gear assembly.
G05002454
498077600 REMOVER Used for removing the ball bearing.
G05002455
498937110 HOLDER Used for removing and installing the drive pinion lock nut.
G05002456
498677100 COMPRESSOR Used for installing the 2-4 brake snap ring.
G05002457
498437000 HIGH CLUTCH PISTON GUIDE Used for installing the high clutch piston.
G05002458
498437100 LOW CLUTCH PISTON GUIDE Used for installing the low clutch piston.
G05002459
899580100 INSTALLER Used for press-fitting the ball bearing of the transfer clutch.
G05002461
28399SA010 OIL SEAL PROTECTOR Used for installing the axle shaft.
G05002460
18675AA000 DIFFERENTIAL OIL SEAL INSTALLER Used for installing the differential side retainer oil seal.
G05002462
398497701 SEAT Used for installing the needle bearing.
G05002464
899524100 PULLER SET Use only the bolt.
  • Used with PULLER SET (499737100).
  • Used with PULLER (499737000).
    1. Puller
    2. Cap
G04997550
18482AA010 CARTRIDGE Troubleshooting for electrical system.
G04997551
22771AA030 SUBARU SELECT MONITOR KIT Troubleshooting for electrical system.