FixVault
Home › Subaru › 2006 › Outback i, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission 4AT › Reduction Driven Gear › Assembly

Reduction Driven Gear: Assembly

  1. Install the snap ring to reduction driven gear.
  2. Install the new ball bearing to reduction driven gear using press.
    Fig 1: Identifying Snap Ring
    G05021916Courtesy of SUBARU OF AMERICA, INC.
  3. Install the snap ring to reduction driven gear.
    Fig 2: Identifying Snap Ring
    G05021917Courtesy of SUBARU OF AMERICA, INC.
About FixVault