FixVault
Home › Subaru › 2006 › Outback i, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission 4AT › Reduction Driven Gear › Disassembly

Reduction Driven Gear: Disassembly

  1. Remove the snap ring from reduction driven gear.
    Fig 1: Identifying Snap Ring
    G05021914Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing from reduction driven gear using ST.

    ST 498077600 REMOVER

    Fig 2: Identifying Ball Bearing
    G05021915Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the snap ring from reduction driven gear.
About FixVault