SUBARU Select Monitor (OBD Mode)

On the «Main Menu» display screen, select the {Each System Check} and press the [YES] key.
On the «System Selection Menu» display screen, select the {Engine Control System} and press the [YES] key.
Press the [YES] key after the information of engine type has been displayed.
On the «Engine Diagnosis» display screen, select the {OBD System} and press the [YES] key.
On the «OBD Menu» display screen, select the Diagnostic Code(s) Display and press the [YES] key.
Make sure DTC is shown on the screen.
NOTE:
- For detailed operation procedure, refer to the "Subaru Select Monitor Operation Manual".
- For details concerning DTC, refer to "List of Diagnostic Trouble Code (DTC)".
  < Ref. to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) . >