FixVault
Home › Subaru › 2006 › Outback i, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 16 (Automatic Transmission 5AT) › AT Main Case › Disassembly › Input Clutch Pack Assembly

Input Clutch Pack Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the front sun gear.
    Fig 1: Identifying Front Sun Gear
    G05022424
  2. Remove the snap ring, and then remove the front carrier.
    Fig 2: Removing Front Carrier
    G05022425
  3. Remove the input clutch assembly from rear internal gear.
    Fig 3: Removing Input Clutch Assembly From Rear Internal Gear
    G05022426
About FixVault