FixVault
Home › Subaru › 2007 › B9 Tribeca Base › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Impact Sensor › Installation

Impact Sensor: Installation

  1. Remove the key from ignition switch.
  2. Close all doors and the rear gate.
  3. Press the UNLOCK button of the keyless transmitter.
  4. Disconnect the ground cable from battery.
  5. Install the impact sensor.
  6. Connect the ground cable to the battery.
  7. Change the setting of impact sensor using Subaru Select Monitor.
About FixVault