FixVault
Home › Subaru › 2007 › B9 Tribeca Base › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Rear Gate Latch Assembly › Removal

Rear Gate Latch Assembly: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the rear gate trim. < Ref. to REMOVAL , Rear Gate Trim. >
  3. Disconnect the harness connector of rear gate latch assembly.
  4. Remove the two screws.
    Fig 1: Identifying Rear Gate Latch Assembly Screws
    G05033654Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the rear gate latch assembly.
About FixVault