FixVault
Home › Subaru › 2007 › B9 Tribeca Base › Repair and Diagnosis › Brakes › Traction Control › Vehicle Dynamics Control (VDC) (Diagnostics) › Subaru Select Monitor › Operation › Clear Memory Mode

Clear Memory Mode

  1. On the «Main Menu», select the {2. Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Brake Control}.
  3. Select the [OK] after {VDC AWD AT} is displayed.
  4. On the «Brake Control Diagnosis» display screen, select the {Clear Memory}.
    CLEAR MEMORY MODE REFERENCE

    Display Contents to be monitored
    Clear memory? DTC deleting function
  5. When "Done" and "Turn ignition switch OFF" are shown on the display screen, turn the ignition switch to OFF and close the Subaru Select Monitor.
    NOTE: For details concerning operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL ".
About FixVault