Rear Axle: Installation
NOTE:
- Be sure to use a new self-locking nut.
- Always tighten the stabilizer bushing in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
Install in the reverse order of removal.
Tightening torque:
Refer to COMPONENT of General Description for tightening torque.
< Refer to COMPONENT , GENERAL DESCRIPTION. >
< Refer to COMPONENT , General Description. >
< Refer to COMPONENT , General Description. >
< Refer to COMPONENT , General Description. >
< Refer to COMPONENT , General Description. >