FixVault
Home › Subaru › 2007 › B9 Tribeca Base › Repair and Diagnosis › Electrical › Gauges › Instrumentation/Driver Info › Warning Box › Removal

Warning Box: Removal

  1. Disconnect the ground cable from battery.
  2. Remove the upper grille. < Refer to REMOVAL , Air Vent Grille. >
  3. Remove the screws of warning box (1) and pull out the warning box.
    Fig 1: Identifying Warning Box Screws
    G05033568Courtesy of SUBARU OF AMERICA, INC.
  4. Disconnect the connector in the rear side of warning box to remove the warning box.
About FixVault