FixVault
Home › Subaru › 2007 › B9 Tribeca Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Fuel Injection System (H6DO) › Knock Sensor › Removal

Knock Sensor: Removal

  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
  3. Remove the intake manifold. <Ref. to REMOVAL , Intake Manifold .>
  4. Disconnect the knock sensor connector.
  5. Remove the knock sensor from cylinder block.
    Fig 1: Identifying Knock Sensor
    G05345567Courtesy of SUBARU OF AMERICA, INC.
About FixVault