Data Link Connector: Note

This connector is used for Subaru Select Monitor.

CAUTION: Do not connect any scan tools except Subaru Select Monitor or general scan tool because the circuit for Subaru Select Monitor may be damaged.

Fig 1: Identifying Data Link Connector Terminals

Courtesy of SUBARU OF AMERICA, INC.

DATA LINK CONNECTOR REFERENCE

Terminal No.	Description	Terminal No.	Description
1	Empty	9	Empty
2	Empty	10	Empty
3	Empty	11	Empty
4	Ground	12	Empty
5	Ground	13	Empty
6	CAN communication line (+)	14	CAN communication line (-)
7	Subaru Select Monitor signal	15	Empty
8	Empty	16	Power supply