Injector Control (Injection Quantity Control)

On the «System Operation Check Mode» display screen, select {Injector Control}.
On the «Injector Control» display screen, select {Injection Quantity Control}.
On the «Start the Engine» display screen, start the engine and select the [OK].
In the «Injection Quantity Control» screen, select the [A] or the [V] to change the setting values. Setting is possible in a range between 0 - 20%, in increments of 1 %.
Select the [NO] to end the injection quantity control. The screen will return to the «Injector Control» screen.
NOTE: For detailed operation procedure, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL ".