Direct Clutch Assembly

• Check the clearance of direct clutch. Measure the clearance "L" between snap ring and retaining plate using a thickness gauge. If it is out of specification, replace them as direct clutch assembly.
• Check for damage on the drive plate, driven plate and snap ring; and replace the entire direct clutch assembly if damaged.

Specification: 

0.6 - 1.0 mm (0.024 - 0.039 in) 

Fig 1: Identifying Clearance Between Snap Ring And Retaining Plate (Direct Clutch Assembly)

Courtesy of SUBARU OF AMERICA, INC.