Electrical Specification
TERMINALS REFERENCE
| Description | Terminal No. | Measuring condition |
|---|---|---|
| Turn signal light LH | 1 (OUTPUT) | Battery voltage is present when the alarm operation is activated. |
| Power supply (Backup) | 2 | Battery voltage is constantly present. |
| Door switch | 6 (INPUT) | 0 V is present when opening one of the doors or rear gates. |
| Impact sensor | 8 | When not applying vibration to the impact sensor, it repeats displaying the 0 V and battery voltage every 45 milliseconds. |
| Ignition switch (ON) | 10 (INPUT) | Battery voltage is present when ignition switch is turned to ON. |
| Horn relay | 24 (OUTPUT) | 0 V is present when the alarm operation is activated. |
| Interrupt relay | 12 (OUTPUT) | Battery voltage is present when the alarm operation is activated. |
| Turn signal light RH | 13 (OUTPUT) | Battery voltage is present when the alarm operation is activated. |
| Ground | 14 | 0 V is constantly present. |
| Security indicator light | 15 (OUTPUT) | 0 V is present when the alarm operation is activated. |
| Power supply for turn signal light (Backup) | 26 | Battery voltage is constantly present. |