FixVault
Home › Subaru › 2007 › Forester X, Automatic › Repair and Diagnosis › Body & Frame › Door Locks › Security And Locks › Security System › Inspection › Check Battery Disconnect Protection

Check Battery Disconnect Protection

  1. Remove the key from the ignition switch.
  2. Close all the doors and rear gate.
  3. Open the front hood.
  4. Press the keyless transmitter LOCK/ARM button, and wait until the security indicator light blinks twice within 1 second in 1 second cycle.
  5. Disconnect the ground cable from battery.
  6. Connect the ground cable to battery.
  7. Check that the security indicator light blinks twice within 1 second in 1 second cycle after connecting the battery ground cable.

    If NG, replace the keyless entry control module.

About FixVault