Differential Case Assembly

Remove the taper roller bearing using the ST and a press.
ST 498077000 REMOVER

Fig 1: Identifying Taper Roller Bearing
Courtesy of SUBARU OF AMERICA, INC.
Secure the case in a vise and remove the hypoid driven gear tightening bolts. Then separate the hypoid driven gear into the differential case (RH) and the differential case (LH).

Fig 2: Identifying Hypoid Driven Gear Differential Case (RH And LH)
Courtesy of SUBARU OF AMERICA, INC.
Pull out the straight pin and pinion shaft, and then remove the differential bevel gear, washer and differential bevel pinion.

Fig 3: Tapping Straight Pin
Courtesy of SUBARU OF AMERICA, INC.